Workshop Technology – Stuffworking.com https://stuffworking.com Know The Basic Sun, 05 Jul 2020 18:51:44 +0000 en hourly 1 https://wordpress.org/?v=6.1 https://stuffworking.com/wp-content/uploads/2019/01/cropped-images-1-32x32.jpg Workshop Technology – Stuffworking.com https://stuffworking.com 32 32 Workshop Technology MCQ 10 https://stuffworking.com/workshop-technology-mcq-10/ https://stuffworking.com/workshop-technology-mcq-10/#respond Sun, 05 Jul 2020 18:51:42 +0000 http://stuffworking.com/?p=1814 The post Workshop Technology MCQ 10 appeared first on Stuffworking.com.

]]> << MCQ 7 MCQ 8 MCQ 9 MCQ 10

1. The advantage of thermit welding is that
2. Cold working of metal increases
3. The parts of circular cross-section which are symmetrical about the axis of rotation are made by
4. Slick is used for repairing and finishing the mould.
5. Linde welding uses
6. A file with 50 - 60 teeth in 25 mm is called bastard file.
7. In welding aluminium with TIG arc welding, alternating current is used.
8. V-block is used to
9. In back-hand welding, the angle between the welding rod and the work is __________ as compared to fore-hand welding.
10. Scribing block is used to
11. A basic hole is one whose
12. Shift is a casting defect which
13. Neutral flame is used to weld
14. The surface to be machined is marked on the pattern by
15. Lap joints are employed on plates having thickness
16. Seam welding is best adopted for metal thickness ranging from
17. In electric resistance welding, pressure applied varies from
Workshop Technology MCQ 10
You got {{userScore}} out of {{maxScore}} correct
{{title}}
{{image}}
{{content}}
Facebook Twitter Email

<< MCQ 7 MCQ 8 MCQ 9 MCQ 10

The post Workshop Technology MCQ 10 appeared first on Stuffworking.com.

]]> https://stuffworking.com/workshop-technology-mcq-10/feed/ 0 Workshop Technology MCQ 9 https://stuffworking.com/workshop-technology-mcq-9/ https://stuffworking.com/workshop-technology-mcq-9/#respond Sun, 05 Jul 2020 18:18:08 +0000 http://stuffworking.com/?p=1811 The post Workshop Technology MCQ 9 appeared first on Stuffworking.com.

]]> << MCQ 7 MCQ 8 MCQ 9 MCQ 10 >>

1. The consumable electrode is used in
2. During cold working process
3. The purpose of a gate is to
4. A process used for making thin phosphate coating on steel is called parkerising.
5. A diamond pointed chisel is used for cutting
6. A progressive limit gauge has
7. In fore-hand welding, the angle between the welding torch and the work is __________ as compared to back-hand welding.
8. The length of hacksaw blade is the distance between the outside edges of the holes which fits over the pins.
9. A large electrode is used in un-shielded arc welding.
10. Acetylene gas is stored in cylinders in
11. The maximum flame temperature occurs
12. Piercing is an operation of cutting
13. Which one of the following material will require the largest size of riser for the same size of casting?
14. A gimlet is a __________ tool.
15. The recrystallisation temperature of steel is
16. In order to deliver molten metal from pouring basin to gate, a __________ is used.
17. The operation of cutting a sheet of metal in a straight line along the length, is known as
18. When two pieces of different metals are to be welded by projection welding, then the projection should be made on the metal piece having __________ conductivity.
19. When filing soft metals, the file teeth are clogged with minute particles of metal. The file should be cleaned by
20. Forming is the operation of removing metal to the desired shape from the edge of a plate.
Workshop Technology MCQ 9
You got {{userScore}} out of {{maxScore}} correct
{{title}}
{{image}}
{{content}}
Facebook Twitter Email

<< MCQ 7 MCQ 8 MCQ 9 MCQ 10 >>

The post Workshop Technology MCQ 9 appeared first on Stuffworking.com.

]]> https://stuffworking.com/workshop-technology-mcq-9/feed/ 0 Workshop Technology MCQ 8 https://stuffworking.com/workshop-technology-mcq-8/ https://stuffworking.com/workshop-technology-mcq-8/#respond Sun, 05 Jul 2020 17:46:07 +0000 http://stuffworking.com/?p=1808 The post Workshop Technology MCQ 8 appeared first on Stuffworking.com.

]]> << MCQ 6 MCQ 7 MCQ 8 MCQ 9 >>

1. Thermit, used in thermit welding, is a mixture of
2. The binder commonly used in making oil sand, is
3. Riddle is used for
4. A basic shaft is one whose
5. When two metal pieces of different thicknesses are to be welded by projection welding, then the projections should be made on __________ metal piece.
6. The increase in hardness due to cold working, is called
7. The material which can be best cut with oxygen cutting process is
8. In fore-hand welding, the angle between the welding rod and the work is kept as
9. When a pattern is made in three parts, the top part, is known as a
10. In a __________ , the molten metal is poured and allowed to solidify while the mould is revolving.
11. The minimum size of a bloom is
12. A file with 20 teeth in 25 mm is called
13. In spot welding, the distance between the nearest edge of the plate and centre of weld should be equal to
14. The flux commonly used in brazing is
15. Which of the following welding method uses a pool of molten metal?
16. The width of slot cut by a hacksaw blade is __________ the width of the blade.
17. A hacksaw blade cuts on the
18. In fore-hand welding, the weld is made
19. The oxygen cylinder is usually painted with
20. In electric resistance welding, pressure is applied just after the completion of current.
Workshop Technology MCQ 8
You got {{userScore}} out of {{maxScore}} correct
{{title}}
{{image}}
{{content}}
Facebook Twitter Email

<< MCQ 6 MCQ 7 MCQ 8 MCQ 9 >>

The post Workshop Technology MCQ 8 appeared first on Stuffworking.com.

]]> https://stuffworking.com/workshop-technology-mcq-8/feed/ 0 Workshop Technology MCQ 7 https://stuffworking.com/workshop-technology-mcq-7/ https://stuffworking.com/workshop-technology-mcq-7/#respond Wed, 01 Jul 2020 15:35:06 +0000 http://stuffworking.com/?p=1786 The post Workshop Technology MCQ 7 appeared first on Stuffworking.com.

]]> << MCQ 5 MCQ 6 MCQ 7 MCQ 8 >>

1. To prevent the body of the blade from jamming in the saw cut, the teeth of blade are
2. The torch used for oxygen cutting is same as for oxy-acetylene welding.
3. Rotary swaging
4. The operation of cutting a number of holes evenly spaced in a regular pattern on a sheet of metal is. called perforating.
5. The welding set up is said to have straight polarity, when
6. The cold chisels are made from
7. In tungsten-inert gas arc welding, a __________ electrode is used.
8. The operation of cutting a cylindrical hole in a sheet of metal by the punch and die is called
9. According to Indian standards, the total number of tolerance grades are
10. During hot working of metals
11. A casting defect which results in general enlargement of a casting is known as
12. The upsetting is a process of
13. The most preferred process for casting gas turbine blades is
14. A ring gauge is used to
15. In die casting, machining allowance is
16. If neutral flame is used in oxy-acetylene welding, both oxygen and acetylene cylinders of the same capacity will be emptied at the same time.
17. The metal is subjected to mechanical working for
18. A moving mandrel is used in
19. The electron beam welding can be carried out in
20. Which of the following material can be used for making patterns ?
Workshop Technology MCQ 7
You got {{userScore}} out of {{maxScore}} correct
{{title}}
{{image}}
{{content}}
Facebook Twitter Email

<< MCQ 5 MCQ 6 MCQ 7 MCQ 8 >>

The post Workshop Technology MCQ 7 appeared first on Stuffworking.com.

]]> https://stuffworking.com/workshop-technology-mcq-7/feed/ 0 Workshop Technology MCQ 6 https://stuffworking.com/workshop-technology-mcq-6/ https://stuffworking.com/workshop-technology-mcq-6/#respond Tue, 30 Jun 2020 15:31:48 +0000 http://stuffworking.com/?p=1783 The post Workshop Technology MCQ 6 appeared first on Stuffworking.com.

]]> << MCQ 4 MCQ 5 MCQ 6 MCQ 7 >>

1. For welding plates of thickness more than 12.5 mm, its edges
2. A casting defect which occurs near the ingates as rough lumps on the surface of a casting is known as
3. When the weld is made from left to right, it is known as back-hand welding.
4. The casting method adopted for ornaments and toys of non-ferrous alloys, is
5. Scab is a casting defect which occurs as sand patches on the upper surface of a casting.
6. Cutting and forming operations can be performed in a single operation in a
7. Most of the oxy-acetylene welding is done with
8. In welding magnesium with TIG arc welding, direct current with __________ is used.
9. In order to check the clearance between two mating surfaces, a __________ gauge should be used.
10. In electric resistance welding, voltage required for heating is
11. The current in electric resistance welding can be regulated by
12. The teeth of hacksaw blade are bent
13. Structural sections such as rails, angles, I-beams are made by
14. The cutting edge of a chisel should be
15. In a cold chamber die casting machine, a measured quantity of molten metal is brought in a ladle from the melting pot to a chamber and forced into the closed die-section by applying hydraulic pressure upon the plunger.
16. A mortise gauge is a
17. In a cold chamber die casting machine
18. In a cold chamber die casting machine, only non-ferrous alloys with __________ are casted.
19. The minimum size of a billet is 10 cm x 10 cm.
20. For cutting brass, the hacksaw blade should have __________ teeth per 25 mm.
Workshop Technology MCQ 6
You got {{userScore}} out of {{maxScore}} correct
{{title}}
{{image}}
{{content}}
Facebook Twitter Email

<< MCQ 4 MCQ 5 MCQ 6 MCQ 7 >>

The post Workshop Technology MCQ 6 appeared first on Stuffworking.com.

]]> https://stuffworking.com/workshop-technology-mcq-6/feed/ 0 Workshop Technology MCQ 5 https://stuffworking.com/workshop-technology-mcq-5/ https://stuffworking.com/workshop-technology-mcq-5/#respond Mon, 29 Jun 2020 17:51:11 +0000 http://stuffworking.com/?p=1772 The post Workshop Technology MCQ 5 appeared first on Stuffworking.com.

]]> << MCQ 3 MCQ 4 MCQ 5 MCQ 6 >>

1. The welding set up is said to have reversed polarity when the work is connected to the negative terminal and the electrode holder to the positive terminal.
2. The cold working of metals is carried out
3. In a __________ , both cutting and non-cutting operations are performed at one station of the press in every stroke of the ram.
4. Cold working requires much higher pressure that hot working.
5. A pouring basin acts as a reservoir for the molten metal.
6. An oxidising process used for aluminium and magnesium articles is called
7. The operation of bending a sheet of metal along a curved axis, is known as
8. Notching is the operation of
9. In order to cut mild steel, the cutting angle of chisel should be
10. Lancing is the operation of
11. In a __________ , two or more operations are performed simultaneously at the single stroke of the ram.
12. The operation of straightening a curved sheet metal, is known as
13. For welding plates of thickness less than 5 mm, its edges
14. In bending operation, the metal takes the shape of a punch.
15. The shrinkage allowance for cast iron pattern is
16. A rip saw
17. An oxidising flame is obtained when equal volumes of oxygen and acetylene are supplied.
18. The correct sequence for preparing a billet for extrusion process is pickling, alkaline cleaning, phosphate coating and lubricating with reactive soap.
19. A neutral flame is obtained by supplying
20. Tandem drawing of wires and tubes is necessary because
Workshop Technology MCQ 5
You got {{userScore}} out of {{maxScore}} correct
{{title}}
{{image}}
{{content}}
Facebook Twitter Email

<< MCQ 3 MCQ 4 MCQ 5 MCQ 6 >>

The post Workshop Technology MCQ 5 appeared first on Stuffworking.com.

]]> https://stuffworking.com/workshop-technology-mcq-5/feed/ 0 Workshop Technology MCQ 4 https://stuffworking.com/workshop-technology-mcq-4/ https://stuffworking.com/workshop-technology-mcq-4/#respond Mon, 29 Jun 2020 06:59:08 +0000 http://stuffworking.com/?p=1766 The post Workshop Technology MCQ 4 appeared first on Stuffworking.com.

]]> << MCQ 2 MCQ 3 MCQ 4 MCQ 5 >>

1. A file removes the metal during
2. A two high rolling mill consists of two rolls which rotate
3. In spot welding, the spacing between two spot weld should not be less than
4. In a unilateral system of tolerance, the tolerance is allowed on
5. Shrinkage allowance is made by adding to external dimensions and subtracting from internal dimensions.
6. A jolt machine is used to
7. Carburising flame is used to weld
8. Aluminium is the best material for making patterns because it is
9. The electrode tip diameter (d) in spot welding should be equal to (where t = Thickness of plate to be welded)
10. In order to get uniform thickness of the plate by rolling process, one provides
11. In a compound die
12. For obtaining a cup of diameter 25 mm and height 15 mm by drawing, the size of the round blank should be approximately
13. When a pattern is made in three parts, the __________ is known as a drag.
14. If the sand is too fine, its permeability will be high.
15. In sheet metal work, the cutting force on the tool can be reduced by
16. Which of the following statement is wrong?
17. During hot working of metals
18. Gagger is used for cleaning the moulding sand.
19. Cores are used to
20. The drawing down is a process of __________ the cross-section of a bar.
Workshop Technology MCQ 4
You got {{userScore}} out of {{maxScore}} correct
{{title}}
{{image}}
{{content}}
Facebook Twitter Email

<< MCQ 2 MCQ 3 MCQ 4 MCQ 5 >>

The post Workshop Technology MCQ 4 appeared first on Stuffworking.com.

]]> https://stuffworking.com/workshop-technology-mcq-4/feed/ 0 Workshop Technology MCQ 3 https://stuffworking.com/workshop-technology-mcq-3/ https://stuffworking.com/workshop-technology-mcq-3/#respond Sun, 28 Jun 2020 12:37:27 +0000 http://stuffworking.com/?p=1762 MCQ 1 MCQ 2 MCQ 3 MCQ 4 >> MCQ 1 MCQ 2 MCQ 3 MCQ 4 >>

The post Workshop Technology MCQ 3 appeared first on Stuffworking.com.

]]> MCQ 1 MCQ 2 MCQ 3 MCQ 4 >>

1. The bloom is smaller than a billet.
2. The purpose of a riser is to
3. In __________ welding, the weld may be made either from left to right or from right to left.
4. In shielded arc welding
5. A pattern maker's shrinkage rule considers
6. In back-hand welding, the angle between the welding torch and the work is kept as
7. In a hot chamber die casting machine
8. In a centrifugal casting method, the impurities are collected in the centre of the casting.
9. When a pattern is made in three parts, the bottom part is known as a cope.
10. In a die casting method, the molten metal is forced into mould under high pressure.
11. A plug gauge is used to check the diameter of shafts and studs.
12. The machining allowance provided on patterns depends upon
13. In submerged arc welding, an arc is produced between a
14. The blank diameter used in thread rolling will be
15. The electrodes used in spot welding have a tip of
16. The cross-section of a chisel is usually
17. Blanking and piercing operations can be performed simultaneously in a
18. Galvanising is a
19. The tolerance produced by shell moulding process of casting is
20. The ferrous metals require more machining allowance than non-ferrous metals.
Workshop Technology MCQ 3
You got {{userScore}} out of {{maxScore}} correct
{{title}}
{{image}}
{{content}}
Facebook Twitter Email

MCQ 1 MCQ 2 MCQ 3 MCQ 4 >>

The post Workshop Technology MCQ 3 appeared first on Stuffworking.com.

]]> https://stuffworking.com/workshop-technology-mcq-3/feed/ 0 Workshop Technology MCQ 2 https://stuffworking.com/workshop-technology-mcq-2/ https://stuffworking.com/workshop-technology-mcq-2/#respond Sat, 27 Jun 2020 17:11:28 +0000 http://stuffworking.com/?p=1758 MCQ 1 MCQ 2 MCQ 3 MCQ 4 >> MCQ 1 MCQ 2 MCQ 3 MCQ 4 >>

The post Workshop Technology MCQ 2 appeared first on Stuffworking.com.

]]> MCQ 1 MCQ 2 MCQ 3 MCQ 4 >>

1. The temperature at which the new grains are formed in the metal is called
2. A zinc diffusion process is called
3. Thread rolling is restricted to
4. In arc welding, the electric arc is produced between the work and the electrode by
5. The type of file used for a wood work is
6. In a centrifugal casting method
7. Which of the following welding process uses non-consumable electrodes?
8. The cold chisels are made by
9. In welding copper alloys with TIG arc welding
10. In average work, the tolerance produced by investment casting method is
11. Which of the following methods can be used for manufacturing 2 metre long seamless metallic tubes?
12. The fullers are used
13. Metal patterns are used for
14. The property of sand due to which it evolves a great amount of steam and other gases is called
15. The algebraic difference between the minimum limit and the basic size is called
16. The instrument which has all the features of try-square, bevel protractor, rule and scriber, is
17. The temperature of oxy-hydrogen flame is __________ oxy-acetylene flame.
18. The centrifugal casting method, is used for casting articles of
19. A saw which cuts wood during the return stroke of the saw is known as
20. When a hole or cavity to be cored is not in line with the parting surface, then a __________ is used.
Workshop Technology MCQ 2
You got {{userScore}} out of {{maxScore}} correct
{{title}}
{{image}}
{{content}}
Facebook Twitter Email

MCQ 1 MCQ 2 MCQ 3 MCQ 4 >>

The post Workshop Technology MCQ 2 appeared first on Stuffworking.com.

]]> https://stuffworking.com/workshop-technology-mcq-2/feed/ 0 Workshop Technology MCQ 1 https://stuffworking.com/workshop-technology-mcq-1/ https://stuffworking.com/workshop-technology-mcq-1/#respond Sun, 21 Jun 2020 07:09:00 +0000 http://stuffworking.com/?p=1751 MCQ 1 MCQ 2 MCQ 3 MCQ 4 >> MCQ 1 MCQ 2 MCQ 3 MCQ 4 >>

The post Workshop Technology MCQ 1 appeared first on Stuffworking.com.

]]> MCQ 1 MCQ 2 MCQ 3 MCQ 4 >>

1. The algebraic difference between the maximum limit and the basic size is called
2. For gas welding, the pressure desired at the welding torch for oxygen is
3. When the dimension is expressed as mm, then the tolerance is
4. The brass and bronze are welded by __________ flame.
5. Seam welding is a
6. When more volume of acetylene and less volume of oxygen is supplied, then a __________ flame is obtained.
7. The operation of producing cup shaped parts from flat sheet metal blanks by bending and plastic flow of metal, is known as
8. Projection welding is a
9. The instrument used to measure external and internal diameter of shafts, thickness of parts and depth of holes, is
10. A stripper-plate machine is used to draw the pattern from the mould.
11. The punch and die set up is __________ for punching and piercing operation.
12. For smoothing and cleaning out depressions in the mould, a __________ is used.
13. The accuracy of micrometers, calipers, dial indicators can be checked by a
14. In a hot chamber die casting machine
15. In a bilateral system of tolerance, the tolerance is allowed on
16. A taper provided on the pattern for its easy and clean withdrawal from the mould is known as
17. In sheet metal blanking, shear is provided on punches and dies so that
18. The draft or taper allowance on casting is generally
19. Surface plate is used to check the trueness of flat surfaces.
20. The chisel used for cutting key ways is
Workshop Technology MCQ 1
You got {{userScore}} out of {{maxScore}} correct
{{title}}
{{image}}
{{content}}
Facebook Twitter Email

MCQ 1 MCQ 2 MCQ 3 MCQ 4 >>

The post Workshop Technology MCQ 1 appeared first on Stuffworking.com.

]]> https://stuffworking.com/workshop-technology-mcq-1/feed/ 0