<< MCQ 7 MCQ 8 MCQ 9 MCQ 10 >>

1. The consumable electrode is used in
2. During cold working process
3. The purpose of a gate is to
4. A process used for making thin phosphate coating on steel is called parkerising.
5. A diamond pointed chisel is used for cutting
6. A progressive limit gauge has
7. In fore-hand welding, the angle between the welding torch and the work is __________ as compared to back-hand welding.
8. The length of hacksaw blade is the distance between the outside edges of the holes which fits over the pins.
9. A large electrode is used in un-shielded arc welding.
10. Acetylene gas is stored in cylinders in
11. The maximum flame temperature occurs
12. Piercing is an operation of cutting
13. Which one of the following material will require the largest size of riser for the same size of casting?
14. A gimlet is a __________ tool.
15. The recrystallisation temperature of steel is
16. In order to deliver molten metal from pouring basin to gate, a __________ is used.
17. The operation of cutting a sheet of metal in a straight line along the length, is known as
18. When two pieces of different metals are to be welded by projection welding, then the projection should be made on the metal piece having __________ conductivity.
19. When filing soft metals, the file teeth are clogged with minute particles of metal. The file should be cleaned by
20. Forming is the operation of removing metal to the desired shape from the edge of a plate.
Workshop Technology MCQ 9
You got {{userScore}} out of {{maxScore}} correct
{{title}}
{{image}}
{{content}}

<< MCQ 7 MCQ 8 MCQ 9 MCQ 10 >>

Leave a Reply

Your email address will not be published. Required fields are marked *